Background Material Answer the following questions after reviewi

Background Material Answer the following questions after reviewing the “Kepler’s Laws and Planetary Motion” and “Newton and Planetary Motion” background pages.         Question 1: Draw a line connecting each law on the left with a description of it on the right.     planets move faster when close to the sun    planets orbit the sun in elliptical paths     planets with large orbits take a long time to complete an orbit Question 2: When written as P2 = a3 Kepler’s 3rd Law (with P in years and a in AU) is applicable to … a) any object orbiting our sun. b) any object orbiting any star. c)any object orbiting any other object. Question 3: The ellipse to the right has an eccentricity of about … a) 0.25 b) 0.5 c) 0.75 d) 0.9 Question 4: For a planet in an elliptical orbit to “sweep out equal areas in equal amounts of time” it must … a) move slowest when near the sun. b) move fastest when near the sun. c) move at the same speed at all times. d) have a perfectly circular orbit.     Question 5: If a planet is twice as far from the sun at aphelion than at perihelion, then the strength of the gravitational force at aphelion will be as it is at perihelion. a) four times as much b) twice as much c) the same d) one half as much e) one quarter as much Kepler’s 1st Law If you have not already done so, launch the NAAP Planetary Orbit Simulator. ·          Tip: You can     change the value of a slider by     clicking on the slider bar or by entering a number in the value box. Open the Kepler’s 1st Law tab if it is not already (it’s open by default). · Enable all 5 check boxes. · The white dot is the “simulated planet”. One can click on it and drag it around. · Change the size of the orbit with the semimajor axis slider. Note how the background grid indicates change in scale while the displayed orbit size remains the same. · Change the eccentricity and note how it affects the shape of the orbit. Be aware that the ranges of several parameters are limited by practical issues that occur when creating a simulator rather than any true physical limitations. We have limited the semi-major axis to 50 AU since that covers most of the objects in which we are interested in our solar system and have limited eccentricity to 0.7 since the ellipses would be hard to fit on the screen for larger values. Note that the semi-major axis is aligned horizontally for all elliptical orbits created in this simulator, where they are randomly aligned in our solar system. · Animate the simulated planet. You may need to increase the animation rate for very large orbits or decrease it for small ones. · The planetary presets set the simulated planet’s parameters to those like our solar system’s planets. Explore these options. Question 6: For what eccentricity is the secondary focus (which is usually empty) located at the sun? What is the shape of this orbit?              Question 7: Create an orbit with a = 20 AU and e = 0. Drag the planet first to the far left of the ellipse and then to the far right. What are the values of r1 and r2 at these locations?        r1 (AU) r2 (AU)   Far Left   Far Right Question 8: Create an orbit with a = 20 AU and e = 0.5. Drag the planet first to the far left of the ellipse and then to the far right. What are the values of r1 and r2 at these locations?    r1   (AU) r2   (AU)   Far Left   Far Right Question 9: For the ellipse with a = 20 AU and e = 0.5, can you find a point in the orbit where r1 and r2 are equal? Sketch the ellipse, the location of this point, and r1 and r2 in the space below. Question 10: What is the value of the sum of r1 and r2 and how does it relate to the ellipse properties? Is this true for all ellipses?                  Question 11: It is easy to create an ellipse using a loop of string and two thumbtacks. The string is first stretched over the thumbtacks which act as foci. The string is then pulled tight using the pencil which can then trace out the ellipse. Assume that you wish to draw an ellipse with a semi-major axis of a = 20 cm and e = 0.5. Using what you have learned earlier in this lab, what would be the appropriate distances for a) the separation of the thumbtacks and b) the length of the string? Please fully explain how you determine these values.           Kepler’s 2nd Law · Use the “clear optional features” button to remove the 1st Law features. · Open the Kepler’s 2nd Law tab. · Press the “start sweeping” button. Adjust the semimajor axis and animation rate so that the planet moves at a reasonable speed. · Adjust the size of the sweep using the “adjust size” slider. · Click and drag the sweep segment around. Note how the shape of the sweep segment changes, but the area does not. · Add more sweeps. Erase all sweeps with the “erase sweeps” button. · The “sweep continuously” check box will cause sweeps to be created continuously when sweeping. Test this option. Question 12: Erase all sweeps and create an ellipse with a = 1 AU and e = 0. Set the fractional sweep size to one-twelfth of the period. Drag the sweep segment around. Does its size or shape change?                   Question 13: Leave the semi-major axis at a = 1 AU and change the eccentricity to e = 0.5. Drag the sweep segment around and note that its size and shape change. Where is the sweep segment the “skinniest”? Where is it the “fattest”? Where is the planet when it is sweeping out each of these segments? (What names do astronomers use for these positions?)              Question 14: What eccentricity in the simulator gives the greatest variation of sweep segment shape?              Question 15: Halley’s comet has a semimajor axis of about 18.5 AU, a period of 76 years, and an eccentricity of about 0.97 (so Halley’s orbit cannot be shown in this simulator.) The orbit of Halley’s Comet, the Earth’s Orbit, and the Sun are shown in the diagram below (not exactly to scale). Based upon what you know about Kepler’s 2nd Law, explain why we can only see the comet for about 6 months every orbit (76 years)?               Kepler’s 3rd Law · Use the “clear optional features” button to remove the 2nd Law features. · Open the Kepler’s 3rd Law tab. Question 16: Use the simulator to complete the table below.    Object P (years) a (AU) e P2 a3   Earth 1.00   Mars 1.52   Ceres 2.77 0.08   Chiron 50.7 0.38 Question 17: As the size of a planet’s orbit increases, what happens to its period?             Question 18: Start with the Earth’s orbit and change the  eccentricity to  0.6. Does changing the eccentricity change the period of the planet?             Newtonian Features · Important: Use the “clear optional features” button to remove other features. · Open the Newtonian features tab. · Click both show vector boxes to show both the velocity and the acceleration of the planet. Observe the direction and length of the arrows. The length is proportional to the values of the vector in the plot. Question 19: The acceleration vector is always pointing towards what object in the simulator?              Question 20: Create an ellipse with a = 5 AU and e = 0.5. For each marked location on the plot below indicate a) whether the velocity is increasing or decreasing at the point in     the orbit (by circling the appropriate arrow) and b) the angle θ between the velocity and acceleration vectors. Note that one is completed for you.           Question 21: Where do the maximum and minimum values of velocity occur in the orbit?           Question 22: Can you describe a general rule which identifies where in the orbit velocity is increasing and where it is decreasing? What is the angle between the velocity and acceleration vectors at these times?                  Astronomers refer to planets in their orbits as “forever falling into the sun”. There is an attractive gravitational force between the sun and a planet. By Newton’s 3rd law it is equal in magnitude for both objects. However, because the planet is so much less massive than the sun, the resulting acceleration (from Newton’s 2nd law) is much larger. Acceleration is defined as the change in velocity – both of which are vector quantities. Thus, acceleration continually changes the magnitude and direction of velocity. As long as the angle between acceleration and velocity is less than 90°, the magnitude of velocity will increase. While Kepler’s laws are largely descriptive of what planet’s do, Newton’s laws allow us to describe the nature of an orbit in fundamental physical laws!

Don't use plagiarized sources. Get Your Custom Essay on
Background Material Answer the following questions after reviewi
Just from $13/Page
Order Essay

What Will You Get?

We provide professional writing services to help you score straight A’s by submitting custom written assignments that mirror your guidelines.

Premium Quality

Get result-oriented writing and never worry about grades anymore. We follow the highest quality standards to make sure that you get perfect assignments.

Experienced Writers

Our writers have experience in dealing with papers of every educational level. You can surely rely on the expertise of our qualified professionals.

On-Time Delivery

Your deadline is our threshold for success and we take it very seriously. We make sure you receive your papers before your predefined time.

24/7 Customer Support

Someone from our customer support team is always here to respond to your questions. So, hit us up if you have got any ambiguity or concern.

Complete Confidentiality

Sit back and relax while we help you out with writing your papers. We have an ultimate policy for keeping your personal and order-related details a secret.

Authentic Sources

We assure you that your document will be thoroughly checked for plagiarism and grammatical errors as we use highly authentic and licit sources.

Moneyback Guarantee

Still reluctant about placing an order? Our 100% Moneyback Guarantee backs you up on rare occasions where you aren’t satisfied with the writing.

Order Tracking

You don’t have to wait for an update for hours; you can track the progress of your order any time you want. We share the status after each step.


Areas of Expertise

Although you can leverage our expertise for any writing task, we have a knack for creating flawless papers for the following document types.

Areas of Expertise

Although you can leverage our expertise for any writing task, we have a knack for creating flawless papers for the following document types.


Trusted Partner of 9650+ Students for Writing

From brainstorming your paper's outline to perfecting its grammar, we perform every step carefully to make your paper worthy of A grade.

Preferred Writer

Hire your preferred writer anytime. Simply specify if you want your preferred expert to write your paper and we’ll make that happen.

Grammar Check Report

Get an elaborate and authentic grammar check report with your work to have the grammar goodness sealed in your document.

One Page Summary

You can purchase this feature if you want our writers to sum up your paper in the form of a concise and well-articulated summary.

Plagiarism Report

You don’t have to worry about plagiarism anymore. Get a plagiarism report to certify the uniqueness of your work.

Free Features $66FREE

  • Most Qualified Writer $10FREE
  • Plagiarism Scan Report $10FREE
  • Unlimited Revisions $08FREE
  • Paper Formatting $05FREE
  • Cover Page $05FREE
  • Referencing & Bibliography $10FREE
  • Dedicated User Area $08FREE
  • 24/7 Order Tracking $05FREE
  • Periodic Email Alerts $05FREE

Our Services

Join us for the best experience while seeking writing assistance in your college life. A good grade is all you need to boost up your academic excellence and we are all about it.

  • On-time Delivery
  • 24/7 Order Tracking
  • Access to Authentic Sources
Academic Writing

We create perfect papers according to the guidelines.

Professional Editing

We seamlessly edit out errors from your papers.

Thorough Proofreading

We thoroughly read your final draft to identify errors.


Delegate Your Challenging Writing Tasks to Experienced Professionals

Work with ultimate peace of mind because we ensure that your academic work is our responsibility and your grades are a top concern for us!

Check Out Our Sample Work

Dedication. Quality. Commitment. Punctuality

It May Not Be Much, but It’s Honest Work!

Here is what we have achieved so far. These numbers are evidence that we go the extra mile to make your college journey successful.


Happy Clients


Words Written This Week


Ongoing Orders


Customer Satisfaction Rate

Process as Fine as Brewed Coffee

We have the most intuitive and minimalistic process so that you can easily place an order. Just follow a few steps to unlock success.

See How We Helped 9000+ Students Achieve Success


We Analyze Your Problem and Offer Customized Writing

We understand your guidelines first before delivering any writing service. You can discuss your writing needs and we will have them evaluated by our dedicated team.

  • Clear elicitation of your requirements.
  • Customized writing as per your needs.

We Mirror Your Guidelines to Deliver Quality Services

We write your papers in a standardized way. We complete your work in such a way that it turns out to be a perfect description of your guidelines.

  • Proactive analysis of your writing.
  • Active communication to understand requirements.

We Handle Your Writing Tasks to Ensure Excellent Grades

We promise you excellent grades and academic excellence that you always longed for. Our writers stay in touch with you via email.

  • Thorough research and analysis for every order.
  • Deliverance of reliable writing service to improve your grades.
Place an Order Start Chat Now